Login to the server console (telnet, …)
Type the command:
(This command allows configuration of the TCP server)
Go to option: 20
Select application number 1, SNMP
Select information about the system option 1
Option 2 community string (with its IP and network mask from the V7R1 release)
Once configured, SNMP service must start the service with the command:
* SNMP STRTCPSVR
(Make sure to type * SNMP as shown).
Now SNMP is enabled, you can check it by launching a check from the application.
Note: To stop the SNMP service, use this command:
ENDTCPSVR * snmp
(be careful to choose * snmp if it crosses IP connections on the partition).