Presentation

Find all the service models dedicated to the supervision of your Network - Network OAW.

Service Models

BOX mode

ALCATEL-OAW-PS-Status

Collects the status of the power supplies of an ALCATEL OmniAccess Wireless controller, and changes the status if one of them has a problem. Configuration: SNMP community, SNMP version, SNMP port

Available from version 3.13

ALCATEL-OAW-Temperature

Collects the temperature of an ALCATEL OmniAccess Wireless controller, and changes state when threshold is crossed. Configuration: SNMP community, SNMP version, SNMP port, alert threshold, critical threshold.

Available from version 3.13

ALCATEL-OAW-AccessPoint-Status

Collects the status of the WIFI access points connected to an ALCATEL OmniAccess Wireless controller, and changes the status according to the number of access points with problems. Configuration: SNMP community, SNMP version, SNMP port, alert threshold, critical threshold, access points to exclude from the control (serial numbers separated by a comma).

Available from version 3.13

ALCATEL-OAW-Connected-Users

Collects the number of users connected to an ALCATEL OmniAccess Wireless controller, and changes status according to configured thresholds (value ranges). Configuration: SNMP community, SNMP version, SNMP port, alert threshold, critical threshold.

Available from version 3.13

ALCATEL-OAW-Controller-Status

Collects the status of the controllers in an ALCATEL OmniAccess Wireless controller domain, and changes the status if any of them experience a problem. This control is only relevant for the master controller of the domain. Configuration: SNMP community, SNMP version, SNMP port

Available from version 3.13

ALCATEL-OAW-Cpu

Collects the CPU load (average over the last minute of the percentage of CPU occupancy) of the processors of an ALCATEL OmniAccess Wireless controller, and changes its state when the CPU load of at least one processor crosses a threshold. Configuration: SNMP community, SNMP version, SNMP port, alert threshold, critical threshold

Available from version 3.13

ALCATEL-OAW-DiskUsage

Collects Flash memory usage of the storage areas of an ALCATEL OmniAccess Wireless controller, and changes state when thresholds are crossed. Configuration: SNMP community, SNMP version, SNMP port, alert threshold, critical threshold.

Available from version 3.13

ALCATEL-OAW-ExternalCards-Status

Collects the status of the external cards of an ALCATEL OmniAccess Wireless controller, and changes the status if one of the cards has a problem. Configuration: SNMP community, SNMP version, SNMP port

Available from version 3.13

ALCATEL-OAW-Fan-Status

Collects the status of the fans of an ALCATEL OmniAccess Wireless controller, and changes the status if one of them has a problem. Configuration: SNMP community, SNMP version, SNMP port

Available from version 3.13

ALCATEL-OAW-Inventory

Collects essential information about an ALCATEL OmniAccess Wireless controller: model, Mac address, serial number, license, number of installed licenses. Configuration: SNMP community, SNMP version, SNMP port

Available from version 3.13

ALCATEL-OAW-Licence-Status

Collects license status on an ALCATEL OmniAccess Wireless controller, and changes status according to the expiration date of the license against thresholds, expressed in number of days. Configuration: SNMP community, SNMP version, SNMP port, alert threshold, critical threshold.

Available from version 3.13

ALCATEL-OAW-MemUsage

Collects the RAM usage of an ALCATEL OmniAccess Wireless controller, and changes state when a threshold is crossed. Configuration: SNMP community, SNMP version, SNMP port, alert threshold, critical threshold

Available from version 3.13

ALCATEL-OAW-AccessPoint-Radio-Usage

Collects the usage rate of a radio frequency on an access point, and changes state when a threshold is crossed. Configuration : SNMP community, SNMP version, SNMP port, alert threshold, critical threshold, access point Mac address

Available from version 3.13

ALCATEL-OAW-AccessPoint-SNR-Ratio

Collects the signal-to-noise ratio of a controller's access points, and changes state when thresholds are crossed. If the list is empty, all access points are analyzed. Access points can be excluded or included. Configuration: SNMP community, SNMP version, SNMP port, alert threshold, critical threshold, comma-separated BSSID list to exclude (optional), comma-separated BSSID list to include (optional)

Available from version 3.13
en_GB

Welcome to ServiceNav!

Do you need some help? More information about our products? Write to us!
You have taken note of our privacy policy.
We use cookies to ensure the best experience on our site. If you continue to use this site, we will assume that you are satisfied with it.

Reserve your place

You have taken note of our privacy policy.