OmniSwitch 10K

Presentation

Find all the service models dedicated to the supervision of your network - Network OmniSwitch 10K.

Service Models

BOX mode

ALCATEL-OS10K-Hardware-Status

Verifies that the switch components (chassis, motherboard, daughterboards, network interfaces, power supplies, fans) are in an operational state. This check changes state if at least one chassis component is not in an operational state. Configuration: SNMP community, SNMP version, SNMP port.

Available from version 3.13

ALCATEL-OS10K-Hardware-Status_SNMPv3

Verifies that the switch components (chassis, motherboard, daughterboards, network interfaces, power supplies, fans) are in an operational state. This check changes state if at least one chassis component is not in an operational state. Configuration: snmpv3 credentials

Available from version 3.13

ALCATEL-OS10K-IO-Usage

Measures the average I/O usage over one minute on each module of the switch, and notifies when a threshold is exceeded (alert and critical) on at least one of them. Configuration : indicate the SNMP community, the SNMP port, the alert and critical thresholds, the SNMP protocol version, the module number (optional).

Available from version 3.13

ALCATEL-OS10K-IO-Usage_SNMPv3

Measures the average I/O usage rate over one minute on each switch module, and notifies when a threshold is exceeded (alert and critical) on at least one of them. Configuration: snmpv3 credentials

Available from version 3.13

ALCATEL-OS10K-PortIO-Usage

Measures the average I/O usage over one minute on each port of the switch, and notifies when a threshold is exceeded (alert and critical) on at least one of them. Configuration : indicate the SNMP community, the SNMP port, the alert and critical thresholds, the SNMP protocol version, the port number (optional).

Available from version 3.13

ALCATEL-OS10K-PortIO-Usage_SNMPv3

Measures the average I/O utilization rate over one minute on each switch port, and notifies when a threshold is exceeded (alert and critical) on at least one of them. Configuration: snmpv3 credentials

Available from version 3.13

ALCATEL-OS10K-RAM-Usage

Measures the percentage of average RAM usage over one minute by the switch's modules, and notifies when a threshold is exceeded (alert and critical) on at least one of them. Configuration : indicate the SNMP community, the SNMP port, the alert and critical thresholds, the SNMP protocol version, the module number (optional).

Available from version 3.13

ALCATEL-OS10K-RAM-Usage_SNMPv3

Measures the percentage of average RAM usage over one minute by the switch modules, and notifies when a threshold is exceeded (alert and critical) on at least one of them. Configuration: snmpv3 credentials

Available from version 3.13

ALCATEL-OS10K-Temperature

Checks that the temperature of the switch components (chassis, motherboard, daughterboards, network interfaces, power supplies, fans) is below the thresholds set by the manufacturer. This check changes state if the temperature of at least one chassis component is above the manufacturer's threshold. Configuration: SNMP community, SNMP version, SNMP port.

Available from version 3.13

ALCATEL-OS10K-Temperature_SNMPv3

Checks that the temperature of the switch components (chassis, motherboard, daughterboards, network interfaces, power supplies, fans) is below the thresholds set by the manufacturer. This check changes state if the temperature of at least one chassis component is above the manufacturer's threshold. Configuration: snmpv3 credentials

Available from version 3.13

ALCATEL-OS10K- NVRAMBattery-Status

Checks the status of the battery used to power the NVRAM and notifies when the battery level is low. Configuration: SNMP community, SNMP version, SNMP port.

Available from version 3.13

ALCATEL-OS10K- NVRAMBattery-Status_SNMPv3

Checks the status of the battery used to power the NVRAM and notifies when the battery level is low. Configuration: snmpv3 credentials

Available from version 3.13

ALCATEL-OS10K-CPU-Usage

Measures the percentage of the average CPU load used over one minute by the switch's modules, and notifies when a threshold is exceeded (alert and critical) on at least one of them. Configuration : indicate the SNMP community, the SNMP port, the alert and critical thresholds, the SNMP protocol version, the module number (optional).

Available from version 3.13

ALCATEL-OS10K-CPU-Usage_SNMPv3

Measures the percentage of the average CPU load used over one minute by the switch modules, and notifies when a threshold is exceeded (alert and critical) on at least one of them. Configuration: snmpv3 credentials

Available from version 3.13

ALCATEL-OS10K-Fan-Status

Checks the correct operation of the fans and notifies in case of failure of one of them. Configuration: SNMP community, SNMP version, SNMP port.

Available from version 3.13

ALCATEL-OS10K-Fan-Status_SNMPv3

Checks the correct operation of the fans and notifies in case of failure of one of them. Configuration: snmpv3 credentials

Available from version 3.13

ALCATEL-OS10K-FileSystem-Usage

Configuration: SNMP community, SNMP version, SNMP port.

Available from version 3.13

ALCATEL-OS10K-FileSystem-Usage_SNMPv3

Configuration: snmpv3 credentials.

Available from version 3.13
en_GB

Welcome to ServiceNav!

Do you need some help? More information about our products? Write to us!
You have taken note of our privacy policy.
We use cookies to ensure the best experience on our site. If you continue to use this site, we will assume that you are satisfied with it.

Reserve your place

You have taken note of our privacy policy.