Presentation

Find all service models dedicated to the supervision of your PRIMERGY Server.

Service Models

BOX mode

Fujitsu_Primergy_Cabinet

Collects the status of all temperature sensors on a Fujitsu PRIMERGY server, and notifies when thresholds, defined by the manufacturer, are exceeded. Prerequisite: Installation of the ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

Fujitsu_Primergy_cpu

Checks the status of processors on a Fujitsu PRIMERGY server. Notifies when at least one processor is defective. Prerequisite: install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

Fujitsu_Primergy_fans

Tests the operation of fans for Fujitsu PRIMERGY servers and notifies in case of failure. Prerequisite: Install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

Fujitsu_Primergy_hdd

Checks the status of disks on a Fujitsu PRIMERGY server. Notifies when at least one disk is defective. Prerequisite: install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

Fujitsu_Primergy_powersupply

Checks the status of power supplies on a Fujitsu PRIMERGY server and indicates their status. Notifies when a power supply is defective. Prerequisite: install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

Fujitsu_Primergy_raid

Checks the status of RAID controllers (supported by ServerView RAID Manager) on a Fujitsu PRIMERGY server. Notifies when at least one RAID controller is defective. Prerequisite: Installation of the ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

Fujitsu_Primergy_ram

Checks the status of the RAM modules on a Fujitsu PRIMERGY server. Notifies when at least one memory module is defective. Prerequisite: install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

Fujitsu_Primergy_temp

Collects the status of all temperature sensors on a Fujitsu PRIMERGY server, and notifies when thresholds, defined by the manufacturer, are exceeded. Prerequisite: Installation of the ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

AGENT mode

A_Fujitsu_Primergy_ram

Checks the status of the RAM modules on a Fujitsu PRIMERGY server. Notifies when at least one memory module is defective. Prerequisite: install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

A_Fujitsu_Primergy_temp

Collects the status of all temperature sensors on a Fujitsu PRIMERGY server, and notifies when thresholds, defined by the manufacturer, are exceeded. Prerequisite: Installation of the ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

A_Fujitsu_Primergy_Cabinet

Displays the serial number, model of a Fujitsu PRIMERGY server and checks whether the box is open or closed. Prerequisite: Install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

A_Fujitsu_Primergy_cpu

Checks the status of processors on a Fujitsu PRIMERGY server. Notifies when at least one processor is defective. Prerequisite: install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

A_Fujitsu_Primergy_fans

Tests the operation of fans for Fujitsu PRIMERGY servers and notifies in case of failure. Prerequisite: Install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

A_Fujitsu_Primergy_hdd

Checks the status of disks on a Fujitsu PRIMERGY server. Notifies when at least one disk is defective. Prerequisite: install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

A_Fujitsu_Primergy_powersupply

Checks the status of power supplies on a Fujitsu PRIMERGY server and indicates their status. Notifies when a power supply is defective. Prerequisite: install ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13

A_Fujitsu_Primergy_Raid

Checks the status of RAID controllers (supported by ServerView RAID Manager) on a Fujitsu PRIMERGY server. Notifies when at least one RAID controller is defective. Prerequisite: Installation of the ServerView® Agents software on the Fujitsu PRIMERGY server. Configuration: SNMP community.

Available from version 3.13
en_GB

Welcome to ServiceNav!

Do you need some help? More information about our products? Write to us!
You have taken note of our privacy policy.
We use cookies to ensure the best experience on our site. If you continue to use this site, we will assume that you are satisfied with it.

Reserve your place

You have taken note of our privacy policy.