Presentation

Find all the service models dedicated to the supervision of your Storage - Storage VNX.

Service Templates

BOX mode

EMC-VNX-StorageProcessors

Checks the status of the EMC VNX array processors and changes status when one of them fails. Prerequisite: Install the Navicli product on the monitoring server. Configuration: User account and password (optional - secure access to the EMC CLI).

Available from version
3.13

EMC-VNX-VMWareNFSDatastore-Status

Collects VMWare NFS datastore status from an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one VMWare NFS datastore is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-VMWareVmfsdatastore-Status

Collects VMWare VMFS datastore status from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one VMWare VMFS datastore is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-MSExchange2010Resource-Status

Gathers Microsoft Exchange 2010 asset status from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Change the state if the state of at least one Microsoft Exchange 2010 resource is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-MSExchange2010VirtualDisk-Status

Collects the status of Microsoft Exchange 2010 virtual disks from an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Changes status if the status of at least one Microsoft Exchange 2010 virtual disk is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-NetworkPorts-Status

Collects network port status from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one network port is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-PS-Status

Checks the power status of an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password. 

Available from version
3.13

EMC-VNX-ReplicationSessions-Status

Collects the status of data replication sessions on an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one replication session is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-SharedFolderServer-Status

Collects the status of file-sharing servers on an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one file sharing server is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-SharedFolders-Status

Collects the status of file shares from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Change state if the state of at least one file share is not optimal: storage pool degradation, more free space, replication session failure, share unavailability. Configuration: user account, password

Available from version
3.13

EMC-VNX-SP-Port

Checks the status of the ports of a processor in the EMC VNX bay and changes status when one of them fails. Prerequisite: Install the Navicli product on the monitoring server. Configuration: User's processor, account and password (optional - secure access to the EMC CLI).

Available from version
3.13

EMC-VNX-SP-Status

Checks the status of the storage processors in an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password. 

Available from version
3.13

EMC-VNX-SSD-Status

Checks the environmental status of the SSDs in an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password. 

Available from version
3.13

EMC-VNX-HyperVDatastore-Status

Collects HyperV datastore status from an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one HyperV datastore is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-IOModule-Status

Checks the status of I/O modules in an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration: user account, password. 

Available from version
3.13

EMC-VNX-iSCSInodes-Status

Collects the status of iSCSI nodes in an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one iSCSI node is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-iSCSIResources-Status

Collects the status of iSCSI resources from an EMC VNXe storage array supporting EMC Unisphere management software. An iSCSI resource is either a container for iSCSI storage (block mode) for a particular device or a LUN. It is recommended that you create a user with read-only access rights on the array. Change the state if the state of at least one iSCSI resource is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-iSCSIVirtualDisks-Status

Collects the status of iSCSI virtual disks in an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Changes status if the status of at least one iSCSI virtual disk is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-Licence-Status

Collects features and licenses installed on an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights to the array. Changes status if the license status for at least one feature is near expiration. Configuration: user account, password.

Available from version
3.13

EMC-VNX-LinkControlCard-Status

Checks the status of link control cards in an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password. 

Available from version
3.13

EMC-VNX-MemoryModule-Status

Checks the status of memory modules in an EMC VNXe storage array that supports Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password. 

Available from version
3.13

EMC-VNX-MSExchange2007Resource-Status

Gathers Microsoft Exchange 2007 asset status from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Change the state if the state of at least one Microsoft Exchange 2007 resource is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-MSExchange2007VirtualDisk-Status

Collects the status of Microsoft Exchange 2007 virtual disks from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Change the state if the state of at least one Microsoft Exchange 2007 virtual disk is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNX-EventLog

Collects event log entries from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Changes status if at least one entry is a warning type, or an error type. Configuration: user account, password, time period.

Available from version
3.13

EMC-VNXe-VMWareNFSDatastore-Status

Collects VMWare NFS datastore status from an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one VMWare NFS datastore is not optimal. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-VMWareVmfsdatastore-Status

Collects VMWare VMFS datastore status from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one VMWare VMFS datastore is not optimal. Configuration:user account, password.

Available from version
3.13

EMC-VNX-Faults

Checks the overall health of the EMC VNX array: enclosures, disks, power supplies, processors, backup power supplies, MirrorView/Asynchronous replication sessions. Prerequisite: Install the Navicli product on the monitoring server. Configuration: user account and password (mandatory - secure access to the EMC CLI).

Available from version
3.13

EMC-VNX-Global-Status

Checks the overall condition of an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password. 

Available from version
3.13

EMC-VNXe-ReplicationSessions-Status

Collects the status of data replication sessions on an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one replication session is not optimal. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-SharedFolderServer-Status

Collects the status of file-sharing servers on an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one file-sharing server is not optimal. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-SharedFolders-Status

Collects the status of file shares from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Change state if the state of at least one file share is not optimal: storage pool degradation, more free space, replication session failure, share unavailability. Configuration:user account, password

Available from version
3.13

EMC-VNXe-SP-Status

Checks the status of the storage processors in an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-SSD-Status

Checks the environmental status of the SSDs in an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-IOModule-Status

Checks the status of I/O modules in an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration: user account, password.

Available from version
3.13

EMC-VNXe-iSCSInodes-Status

Collects the status of iSCSI nodes in an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one iSCSI node is not optimal. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-iSCSIResources-Status

Collects the status of iSCSI resources from an EMC VNXe storage array supporting EMC Unisphere management software. An iSCSI resource is either a container for iSCSI storage (block mode) for a particular device or a LUN. It is recommended that you create a user with read-only access rights on the array. Change the state if the state of at least one iSCSI resource is not optimal. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-iSCSIVirtualDisks-Status

Collects the status of iSCSI virtual disks in an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Changes status if the status of at least one iSCSI virtual disk is not optimal. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-Licence-Status

Collects features and licenses installed on an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights to the array. Changes status if the license status for at least one feature is near expiration. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-LinkControlCard-Status

Checks the status of link control cards in an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-MemoryModule-Status

Checks the status of memory modules in an EMC VNXe storage array that supports Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password.

Available from version
3.13

EMC-VNX-EncryptionKey-Status

Collects encryption key status from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Change the status if the encryption key status is not optimal. Configuration: user account, password.

Available from version
3.13

EMC-VNXe-NetworkPorts-Status

Collects network port status from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one network port is not optimal. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-PS-Status

Checks the power status of an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password.

Available from version
3.13

EMC-VNX-DPE-Status

Checks the status of the disk processor enclosures in an EMC VNXe storage array that supports EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration: user account, password. 

Available from version
3.13

EMC-VNXe-Batteries-Status

Checks the battery status of an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-CacheCard-Status

Checks the status of cache cards in an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-DiskArrayEnclosure-Status

Checks the status of the disk arrays in an EMC VNXe storage array that supports EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration: user account, password.

Available from version
3.13

EMC-VNXe-Disk-Status

Checks the status of disks in an EMC VNXe storage array that supports Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-DPE-Status

Checks the status of the disk processor enclosures in an EMC VNXe storage array that supports EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration: user account, password.

Available from version
3.13

EMC-VNXe-EncryptionKey-Status

Collects encryption key status from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Change the status if the encryption key status is not optimal. Configuration:user account, password.

Available from version
3.13

EMC-VNXe-EventLog

Collects event log entries from an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Changes status if at least one entry is a warning type, or an error type. Configuration: user account, password, time period.

Available from version
3.13

EMC-VNXe-Global-Status

Checks the overall condition of an EMC VNXe / VNX storage array supporting EMC Unisphere management software. It is recommended to create a user with read-only access rights on the array. Configuration: user account, password.

Available from version
3.13

EMC-VNXe-HyperVDatastore-Status

Collects HyperV datastore status from an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Changes state if the state of at least one HyperV datastorage is not optimal. Configuration:user account, password.

Available from version
3.13

EMC-VNX-Batteries-Status

Checks the battery status of an EMC VNXe storage array supporting Unisphere EMC management software. It is recommended that you create a user with read-only access rights on the array. Configuration: user account, password.

Available from version
3.13

EMC-VNX-CacheCard-Status

Checks the status of cache cards in an EMC VNXe storage array supporting EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration: user account, password.

Available from version
3.13

EMC-VNX-CacheStatus

Checks the read and write status of EMC VNX array caches and changes status when one of them fails (not active, not mirrored). Prerequisite: Install the Navicli product on the monitoring server. Configuration: user account and password (optional - secure access to the EMC CLI).

Available from version
3.13

EMC-VNX-DiskArrayEnclosure-Status

Checks the status of the disk arrays in an EMC VNXe storage array that supports EMC Unisphere management software. It is recommended that you create a user with read-only access rights on the array. Configuration: user account, password. 

Available from version
3.13

EMC-VNX-Disk-Status

Checks the status of the disks in the EMC VNX array and changes status when one of them fails (rebuilding, down). Prerequisite: Install the Navicli product on the monitoring server. Configuration: user account and password (optional - secure access to the EMC CLI).

Available from version
3.13
en_US

Welcome to ServiceNav!

Need help? More information about our products? Write to us!
You have taken note of our privacy policy.

[COVID - 19 ] - TELEWORKING, TARGET AVAILABILITY 100% !

While the epidemic lasts, ensure the availability and performance of your IT services for teleworking, with ServiceNav!

Following the government's call to mobilize to help businesses overcome the current health and economic context, we help you, free of charge, to ensure the complete monitoring of your teleworking environments: VPN, VDI, Teams, Skype Enterprise, Citrix... Objectives: collection, availability and usage indicators, dashboards to support your communication.
We use cookies to ensure that you have the best possible experience on our site, and if you continue to use this site, we will assume that you are satisfied with it.

Reserve your place

You have taken note of our privacy policy.