AMM

Tests the sensors of an HP MSA2000 network storage array (temperature, power, fan). Configuration: SNMP community  

Collects statistics on the activity of a controller (CPU), and raises alerts when thresholds are crossed. Configuration: SSH user account and password, SSH port, thresholds expressed in MB/s.

Collects the event log from the disk controllers. The user must specify a collection period: all events between the verification date and (verification date - verification period) will be traced back. Configuration: SSH user account and password, scan time range, SSH port.

Analyzes the state of the physical disks in the array. Configuration: SSH user account and password, SSH port.

Collects statistics on activity on a host port in the HP MSA 2000 bay and raises alerts if thresholds are crossed, if a port is disconnected or if there is no I/O detection. Configuration: SSH user account and password, SSH port, thresholds expressed in MB/s.

Collects port information by host at the bay controller level, and indicates an alert for a disconnected port or no I/O detection. Configuration: SSH user account and password, SSH port.

Monitors the sensor values for each control module (ctlr , OIM) and power supply (PSU), and raises an alarm when thresholds are exceeded. Configuration: telnet user account and password, telnet port.

Analyzes the state of virtual disks (vdisks) built from the physical disks in the array. Configuration: SSH user account and password, SSH port.

Indicates whether an entity disk is in error. Configuration: Login, password, port number.

Indicates whether an entity disk is in error. Configuration: Login, password, port number.

Collecte des statistiques sur l’activité d’un contrôleur (taux de transfert de données en lecture et écriture), et lève des alertes en cas de seuils franchis. Configuration: compte et mot de passe d’utilisateur ssh, port ssh, seuils exprimés en Mo/s

Collecte le journal des événements au niveau des contrôleurs de disques. L’utilisateur doit spécifier une période de collecte: tous les événements entre la date de vérification et (date de vérification – période de vérification) seront remontés. Configuration: compte et mot de passe d’utilisateur ssh, plage temporelle d’analyse, port ssh.

Collecte des statistiques sur l’activité d’un contrôleur (CPU), et lève des alertes en cas de seuils franchis. Configuration: compte et mot de passe d’utilisateur ssh, port ssh, seuils exprimés en Mo/s. Ne pas utiliser de mots de passe avec caractères accentués ou interprétables sous Linux.

Analyse l’état des disques physiques de la baie. Configuration: compte et mot de passe d’utilisateur ssh, port ssh.

Collecte de l’information sur les ports par hôte au niveau des contrôleurs de la baie, et indique une alerte en cas de port déconnecté ou aucune détection d’entrée-sortie. Configuration: compte et mot de passe d’utilisateur ssh, port ssh.

Contrôle les valeurs des capteurs pour chaque module de commande (ctlr , OIM) et l’alimentation (PSU), et lève une alerte en cas de seuils franchis. Configuration : compte et mot de passe d’utilisateur ssh, port ssh.

Collecte des statistiques sur l’activité sur un port hôte de la baie HP MSA 2000 et lève des alertes en cas de seuils franchis, en cas de port déconnecté ou aucune détection d’entrée-sortie. Configuration: compte et mot de passe d’utilisateur ssh, port ssh, seuils exprimés en Mo/s.

Analyse l’état des disques virtuels (vdisks) construits à partir des disques physiques de la baie. Configuration: compte et mot de passe d’utilisateur ssh, port ssh.

Analyzes the state of virtual disks (vdisks) built from the physical disks in the array. Configuration: HTTP/HTTPS user account and password, HTTP/HTTPS port.

Collects statistics on the activity of a controller (read and write data transfer rate), and raises alerts when thresholds are crossed. Configuration: SSH user account and password, SSH port, thresholds expressed in Mb/s.

Collects statistics on the activity of a controller (read and write data transfer rate), and raises alerts when thresholds are crossed. Configuration: HTTP/HTTPS user account and password, HTTP/HTTPS port, thresholds expressed in MB/s.

Collects statistics on the activity of a controller (CPU), and raises alerts when thresholds are crossed. Configuration: HTTP/HTTPS user account and password, HTTP/HTTPS port, percentage thresholds.

Collects the event log from the disk controllers. The user must specify a collection period: all events between the verification date and (verification date - verification period) will be traced back. Configuration: HTTP/HTTPS user account and password, scan time range, HTTP/HTTPS port.

Analyzes the state of the physical disks in the array. Configuration: HTTP/HTTPS user account and password, HTTP/HTTPS port.

Collects statistics on activity on a host port in the HP MSA 1040 bay and raises alerts if thresholds are crossed, if a port is disconnected or if no I/O detection is detected. Configuration: HTTP/HTTPS user account and password, HTTP/HTTPS port, thresholds expressed in MB/s.

Collects port information by host at the bay controller level, and indicates an alert for a disconnected port or no I/O detection. Configuration: HTTP/HTTPS user account and password, HTTP/HTTPS port.

Monitors the sensor values for each control module (ctlr, OIM) and power supply (PSU ), and raises alarms when thresholds are exceeded. Configuration: HTTP/HTTPS user account and password, HTTP/HTTPS port.