Presentation

Find all the service models dedicated to the supervision of your Storage - Storage P 4500.

Service Templates

BOX mode

HP-P4000-Raid-Status

Collects the status of RAID devices from a P4000 node. Goes to an ALERT state if at least one of them is rebuilding, to a CRITICAL state if at least one of them is degraded. Configuration: SNMP community, SNMP version, SNMP port, IP address of the node. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Temperature

Collects the temperature from one P4000 node at multiple sensors. Goes into an ALERT / CRITICAL state if the status of at least one temperature sensor exceeds the specified thresholds. Configuration: SNMP community, SNMP version, SNMP port, node IP address, alert threshold, critical threshold. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Cluster-Volume-IOPS

Collects the number of pending read and write operations on the HP P4000 cluster volume specified as an argument. Switches to an ALERT/CRITICAL state when thresholds are crossed. If no volume is specified, the check is performed on all volumes. Configuration: SNMP community, SNMP version, SNMP port, node IP address, volume name, alert threshold for read operations, critical threshold for read operations, alert threshold for write operations, critical threshold for write operations. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Cluster-Volume-iSCSIsessions

Collects the number of iSCSI sessions on the volume of a P4000 cluster specified as an argument. Switches to an ALERT/CRITICAL state when thresholds are crossed. If no volume is specified, the check is performed on all volumes. Configuration: SNMP community, SNMP version, SNMP port, cluster IP address, volume name, alert threshold, critical threshold. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Cluster-VolumeStatus

Collects the volume status of a P4000 cluster. Goes to CRITICAL state if at least one of the volumes is unavailable due to replication problems, and displays the volumes in that case. Configuration: SNMP community, SNMP version, SNMP port, cluster IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Disk-Connected

Collects the presence of disks from a P4000 node. Goes into CRITICAL state if at least one of the disks is not physically connected to the node. Configuration: SNMP community, SNMP version, SNMP port, node IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Disk-SmartStatus

Collects the SMART status of the disks in a P4000 node. Goes to CRITICAL state if the SMART state of at least one disk is not normal. Configuration: SNMP community, SNMP version, SNMP port, node IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Disk-Temperature

Collects the temperature of the disks of a P4000 node. Goes into an ALERT / CRITICAL state if the temperature of at least one disk in the node exceeds the specified thresholds. Configuration: SNMP community, SNMP version, SNMP port, node IP address, alert threshold, critical threshold. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Fan-Status

Collects fan status from a P4000 node. Goes to CRITICAL if the status of at least one fan is not normal. Configuration: SNMP community, SNMP version, SNMP port, node IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Inventory

Collects essential information about an HP P4000 node: model, name, serial number, software version, BIOS version. Configuration: SNMP community, SNMP version, SNMP port, node IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-network-Status

Collects the status of network devices from a P4000 node. Goes to CRITICAL state if the state of at least one network device is not active. Configuration: SNMP community, SNMP version, SNMP port, node IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-PS-Status

Collects the status of the power supplies of a P4000 node. Goes to CRITICAL state if the status of at least one power supply is not normal. Configuration: SNMP community, SNMP version, SNMP port, node IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Cache-BPS-Status

Collects the status of the backup cache of the controllers of a P4000 node. Goes to CRITICAL if the state of the backup cache of at least one controller is not normal. Configuration: SNMP community, SNMP version, SNMP port, node IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Cache-Status

Collects the status of the controller cache of a P4000 node. Goes to CRITICAL if the cache status of at least one controller is not normal. Configuration: SNMP community, SNMP version, SNMP port, node IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Cluster-Quorum

Collects the quorum status of a P4000 cluster. Switches to an ALERT state if the number of active managers on the cluster is greater than or equal to the required quorum, but some managers are inactive; displays the non-active managers. Goes to the CRITICAL state if the number of active managers on the cluster is less than the required quorum, and displays the non-active managers. Configuration: SNMP community, SNMP version, SNMP port, node IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-cluster-volume

Checks the free space on the volumes of a P4000 cluster. Goes to CRITICAL if at least one of the volumes is full, and displays the volumes in that case. Configuration: SNMP community, SNMP version, SNMP port, cluster IP address. This model is for HP P4x00 devices with SAN/iQ version 8.5 and higher.

Available from version
3.13

HP-P4000-Cluster-VolumeFull

Controls the disk space used on a volume of a StoreVirtual / Lefthand SAN. Alerts if it exceeds a certain threshold. Thresholds are expressed as a percentage of the volume size. Configuration: SNMP monitoring account, volume name, thresholds.

Available from version
3.13
en_US

Welcome to ServiceNav!

Need help? More information about our products? Write to us!
You have taken note of our privacy policy.

[COVID - 19 ] - TELEWORKING, TARGET AVAILABILITY 100% !

While the epidemic lasts, ensure the availability and performance of your IT services for teleworking, with ServiceNav!

Following the government's call to mobilize to help businesses overcome the current health and economic context, we help you, free of charge, to ensure the complete monitoring of your teleworking environments: VPN, VDI, Teams, Skype Enterprise, Citrix... Objectives: collection, availability and usage indicators, dashboards to support your communication.
We use cookies to ensure that you have the best possible experience on our site, and if you continue to use this site, we will assume that you are satisfied with it.

Reserve your place

You have taken note of our privacy policy.