Presentation

Find all the service models dedicated to the supervision of your Storage - Storage Any storage.

Service Templates

BOX mode

NetApp-NDMP-Sessions

Collects the number of open NDMP sessions on a NetApp storage array and notifies when thresholds are exceeded. Configuration: SNMP community, alert threshold, critical threshold.

Available from version
3.13

NetApp-Network-Usage

Calculates the throughput of a network interface, and notifies when thresholds are exceeded. Shows the list of network interfaces if the name of the network interface is not recognized. Configuration: SNMP community, network interface name, alert threshold, critical threshold.

Available from version
3.13

NetApp-NVRAM-Status

Checks the status of the NVRAM battery(s) in a NetApp storage array, and notifies if any of the NVRAM batteries fail (discharged, near end of life). Configuration: SNMP community.

Available from version
3.13

NetApp-PowerSupply-Status

Tests the status of power supplies for NETAPP storage arrays and notifies in case of failure of one of them. Configuration: SNMP community.

Available from version
3.13

NetApp-Temp-Status

Indicates whether the NETAPP storage bay operates within the temperature range recommended by the manufacturer. The equipment stops if it operates beyond this temperature range. Configuration: SNMP community.

Available from version
3.13

NetApp-CPU-Usage

Collects the percentage of CPU usage from a NetApp storage array and notifies when thresholds are exceeded. Configuration: SNMP community.

Available from version
3.13

NetApp-Disk-Status

Checks the status of disks in a NetApp storage array and notifies if any of them fail. Configuration: SNMP community.

Available from version
3.13

NetApp-Disk-Usage

Collects the utilization rate and the total space used from a volume of a NetApp storage array, and notifies when thresholds are exceeded. Indicates the list of volumes if the volume name is not recognized. Configuration: SNMP community, volume name, alert threshold, critical threshold.

Available from version
3.13

NetApp-Enclosures-Status

Checks the status of the disk shelves in a NetApp storage array (power supplies, fans, temperature, electronic failure, overvoltage), and notifies if any of them fail. Configuration: SNMP community.

Available from version
3.13

NetApp-Fan-Status

Tests the status of fans for NETAPP storage arrays and notifies in case of failure of one of them. Configuration: SNMP community.

Available from version
3.13

NetApp-Global-Status

Checks the global status of a NetApp storage array, and notifies when an abnormal status occurs. The scan combines a hardware status check (hardware component failure) and volume status check (full volumes). This check displays a global status message Configuration: SNMP community.

Available from version
3.13

NetApp-7mode-Aggregat-Usage

Collects the utilization rate and total space used from all aggregates in a NetApp storage array, and notifies when thresholds are exceeded.

Configuration: bay user account, password, critical threshold and alert threshold in percent.

Available from version
3.13

NetApp-7mode-AllVolume-Usage

Collects the utilization rate and total space used of all volumes in a NetApp storage array and notifies when thresholds are exceeded.

Configuration: Hardware account: user, password, alert threshold, critical threshold

Available from version
3.13

NetApp-7mode-SnapMirror-Lagtime

Collects the replication delay to a destination volume or qtree in a NetApp storage array, and notifies when thresholds are exceeded.

Configuration :Bay user account, password, destination volume name, alert and critical threshold depending on the chosen unit (seconds, minutes, hours and days).

Available from version
3.13
en_US
fr_FR en_US

Welcome to ServiceNav!

Need help? More information about our products? Write to us!
You have taken note of our privacy policy.

[COVID - 19 ] - TELEWORKING, TARGET AVAILABILITY 100% !

While the epidemic lasts, ensure the availability and performance of your IT services for teleworking, with ServiceNav!

Following the government's call to mobilize to help businesses overcome the current health and economic context, we help you, free of charge, to ensure the complete monitoring of your teleworking environments: VPN, VDI, Teams, Skype Enterprise, Citrix... Objectives: collection, availability and usage indicators, dashboards to support your communication.
We use cookies to ensure that you have the best possible experience on our site, and if you continue to use this site, we will assume that you are satisfied with it.

Reserve your place

You have taken note of our privacy policy.