Find all the service templates specific to monitoring your Network - All network devices.

All equipment
Presentation
Service Templates
BOX mode
UDP-Port
Tests the status of the UDP port indicated in the configuration and measures the protocol response time. Configuration: IP address, UDP port number.
Available from version
3.13
TCP-Port_80
Tests if TCP port 80 is open, and collects the connection delay. Notifies when thresholds are exceeded. Configuration : TCP port number, alert thresholds and critical connection timeout expressed in seconds.
Available from version
3.13
TCP-Port_9465
Tests if TCP port 9465 is open, and collects the connection delay. Notifies when thresholds are exceeded. Configuration : TCP port number, alert thresholds and critical connection timeout expressed in seconds.
Available from version
3.13
SYSTEM-UPTIME
Collects the uptime of an equipment and goes into CRITICAL state if this uptime is below the critical threshold, goes into ALERT state if this uptime is below the alert threshold. Configuration: SNMP community, alert threshold expressed in minutes, critical threshold expressed in minutes.
Available from version
3.13
TCP-Port
Tests if the TCP port specified in configuration is open, and collects the connection delay. Notifies when thresholds are exceeded. Configuration: TCP port number, alert thresholds and critical connection timeout in seconds.
Available from version
3.13
TCP-Port_443
Tests if TCP port 443 is open, and collects the connection delay. Notifies when thresholds are exceeded. Configuration : TCP port number, alert thresholds and critical connection timeout expressed in seconds.
Available from version
3.13
News
The supervision of servers at the heart of your company
18 November 2020
Integration with Slack: Why and How?
10 April 2020
Why monitor an Office365 environment?
9 April 2020
8 April 2020
Need some help?